What problems should be avoided when factory shelves are transported

In the process of transporting factory shelves, you should pay attention to the above three matters, because as long as you pay attention to the details, you can ensure that there are no accidents in the factory shelves during transportation.

1. In the process of product delivery, we need to avoid accidents. The occurrence of accidents will inevitably lead to many losses. Then this is a problem that we need to pay attention to. This is better.

2. We may encounter rainy weather during the transportation, so at this time we need to take good care to prevent rainwater from entering the product. This is also a good maintenance for the product, so important We have done a very good job in reducing huge losses.

3. We need to take good care of our products during the process of getting on and off the car. Since our products may be fragile during transportation, we need to take good care of maintenance.

In addition, the daily maintenance of factory shelves must be done in order to make the factory shelves last long.

Apply maintenance paint regularly to reduce rust. Do a daily inspection, and fix the loose screws in time. Make timely ventilation to ensure that the warehouse is not excessively humid.

Avoid excessive sunlight, ventilate the shelves reasonably, avoid placing wet goods on the shelves, and drain and dehumidify as much as possible. A set of anti-collision pillars are equipped according to different shelves, aisle widths and delivery items. Install anti-collision barriers in the direction of the passage.

The quantity of goods placed on the shelf must be within the load-bearing capacity of the shelf. The warehouse manager should mark the load-bearing limit on the shelf. It is necessary to comply with the rule that the bottom of the shelf is heavy and light, that is, the bottom layer is heavy and the upper layer is light.

Heavy-duty and high-rise shelf warehouses must be equipped with powered push-up trucks. The use and operation of push-up trucks must only be operated by qualified personnel. Most of the deformation of the storage rack column is caused by the use of pusher trucks by non-designated personnel.